HAMILTON MATERIALS INC -- 90, SMOOTH-SET -- 8030-00N029823
===================== Product Identification ===================== Product ID:90, SMOOTH-SET MSDS Date:06/15/1988 FSC:8030 NIIN:00N029823 === Responsible Party === Company Name:HAMILTON MATERIALS INC Address:345 WEST MEATS AVE City:ORANGE State:CA ZIP:92665 Country:US Info Phone Num:714-637-2770 Emergency Phone Num:714-637-2770 CAGE:HAMMI === Contractor Identification === Company Name:HAMILTON MATERIALS INC Address:345 WEST MEATS AVE City:ORANGE State:CA ZIP:92665 Country:US Phone:714-637-2770 CAGE:HAMMI ============= Composition/Information on Ingredients ============= Ingred Name:SULFURIC ACID, CALCIUM SALT; (CALCIUM SULFATE (PLASTER OF PARIS)) CAS:7778-18-9 RTECS #:WS6920000 OSHA PEL:15 MG/M3 TDUST;5RESP ACGIH TLV:10 MG/M3 TOTAL DUST Ingred Name:CALCIUM CARBONATE (LIMESTONE) CAS:1317-65-3 RTECS #:EV9580000 OSHA PEL:15 MG/M3 TDUST;5RESP ACGIH TLV:10 MG/M3 TDUST ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: INHALATION OF DUST MAY CAUSE IRRITATION OF UPPER RESPIRATORY SYSTEM. CHRONIC: LONG TERM EXPOSURE TO HIGH DUST LEVELS MAY IMPAIR LUNG FUNCTION. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: WASH WITH WATER FOR AT LEAST 15 MINUTES, CALL PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INGESTION: CALL PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point:NONCOMBUSTIBLE Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE . Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER. ================== Accidental Release Measures ================== Spill Release Procedures:SWEEP UP SPILLED MATERIAL INTO WASTE CONTAINER FOR DISPOSAL. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER. Other Precautions:NONE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR FOR DUST IF DRY SANDING. Ventilation:LOCAL EXHAUST PREFERRED. MECHANICAL EXHAUST SATISFACTORY. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:NONE. Work Hygienic Practices:DO NOT DRY SAND-WET SAND OR SPONGE JOINTS, BEADS AND NAILS. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:N1 Spec Gravity:1.0-2.3 pH:7-9 Solubility in Water:SLIGHT Appearance and Odor:WHITE POWDER-NO ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE KNOWN. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:WHEN HEATED TO DECOMPOSITION RELEASES SOX. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.