QUARTET MANUFACTURING COMPANY -- MARKER BOARD CLEANER #550 -- 6850-00-118-0859
===================== Product Identification ===================== Product ID:MARKER BOARD CLEANER #550 MSDS Date:11/24/1987 FSC:6850 NIIN:00-118-0859 === Responsible Party === Company Name:QUARTET MANUFACTURING COMPANY Address:5700 OLD ORCHARD RD City:SKOKIE State:IL ZIP:60077 Country:US Info Phone Num:312-965-0600 Emergency Phone Num:312-965-0600 CAGE:64588 === Contractor Identification === Company Name:QUARTET MANUFACTURING Address:5700 OLD ORCHARD RD Box:City:SKOKIE State:IL ZIP:60077 Country:US Phone:312-965-0600 CAGE:64588 ============= Composition/Information on Ingredients ============= Ingred Name:ETHYL ALCOHOL (ETHANOL) CAS:64-17-5 RTECS #:KQ6300000 Fraction by Wt: 3-6% OSHA PEL:1000 PPM ACGIH TLV:1000 PPM; 9192 Ingred Name:ORGANIC SURFACTANT Fraction by Wt: 1-5% OSHA PEL:50 PPM, S (MFR) ACGIH TLV:50 PPM, S (MFR) ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES:MAY CAUSE MODERATE IRRITATION. VAPORS MAY IRRITATE. SKIN:PROLONGED & REPEATED CONTACT MAY BE IRRITATING. INHAL: PROLONGED INHALATION OF VAPOR MAY IRRITATE NOSE & THROAT. INGEST:AMOUNTS INGESTED I NCIDENTAL TO INDUSTRIAL HANDLING ARE NOT LIKELY TO CAUSE INJURY; HOWEVER, INGESTION OF LARGE AMOUNTS MAY CAUSE INJURY. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:INHAL:REMOVE TO FRESH AIR & IF BRTHG STOPPED, GIVE ARTF RESP. GET MD IMMED. EYE:FLUSH W/WATER FOR AT LEAST 15 MIN, GET MD IMMED. INGEST:GIVE 2 GLASSES OF WARM WATER & INDUCE VOMIT BY PLACING FINGERS I N BACK OF THROAT OR GIVE IPECAC SYRUP IF LG AMTS INGESTED. DO NOT GIVE UNCON PERSON ANYTHING ORALLY. GET MD. SKIN:FLUSH W/COPIOUS AMTS OF WATER, CALL MD . ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:>180F,>82C Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL OR FOAM, CLASS A, BC OR ABC FIRE EXTINGUISHERS. Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP . PVNT HUMAN EXPOS TO FIRE, SMOKE, FUMES OR PRODS OF COMBUST. EVACUATE NON-ESSENTIAL PERSONNEL FROM AREA. Unusual Fire/Explosion Hazard:NONE ================== Accidental Release Measures ================== Spill Release Procedures:CUT OFF ANY SOURCE OF IGNIT & VENT SPILL AREA. SML:ABSORB MATL ON PAPER, VERMICULITE, FLOOR ABSORB/OTHER ABSORB MATL & TRANSFER SOLID WASTE RECEPTICLE. FLUSH AREA W/WATER. LG:STOP SPILL AT SOURCE, DIK E AREA OF SPILL TO PVNT SPREADING, (SUPP DATA) Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE ONLY IN TIGHTLY CLOSED CONTAINERS & KEEP AWAY FROM SPARKS, OPEN FLAMES, STRONG OXIDIZING AGENTS & EXCESSIVE HEAT. Other Precautions:NONE ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT NORMALLY NEEDED IF LOCAL EXHAUST SATISFACTORY. Ventilation:LOCAL EXHAUST RECOMMENDED. Protective Gloves:CHEMICALLY RESISTANT GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:PROTECTIVE CLOTHING IF RPTD/PRLNGD & SIGNIFICANT CONTACT & EXPOSURE EXPECTED. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health SPILL PROC:PUMP LIQUID TO SALVAGE TANK. REMAINING LIQUID MAY BE TAKEN UP ON SAND, CLAY, EARTH, FLOOR ABSORBENT, OR OTHER ABSORBENT MATERIAL & SHOVELED INTO CONTAINERS. CONSULT A DISPOSAL EXPERT ON DIS POSITION OF MATERIAL. ================== Physical/Chemical Properties ================== HCC:N1 Boiling Pt:B.P. Text:100F,38C Spec Gravity:1.013 Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1). Solubility in Water:COMPLETE Appearance and Odor:PALE, WHITE SOLUTION, PLEASANT ODOR. Percent Volatiles by Volume:1-5 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING MATERIALS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:NONE ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF I/A/W ALL LOCAL, STATE AND FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.