PPG INDUSTRIES,INC -- AQUAPON FLOOR PATCH,97-180,COMP A  -- 8010-00N006075
<pre>=====================  Product Identification  =====================

Product ID:AQUAPON FLOOR PATCH,97-180,COMP A
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006075
=== Responsible Party ===
Company Name:PPG INDUSTRIES,INC
Emergency Phone Num:412-434-3131
CAGE:GO796
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC CHEMICAL DIVISION
Address:ONE GATEWAY CENTER
City:PITTSBURGH
State:PA
ZIP:15222-1416
Country:US
Phone:304-843-1300
CAGE:93915
Company Name:PPG INDUSTRIES,INC. COATINGS TRESINS DIV.
Address:1 PPG PL
City:PITTSBURGH
State:PA
ZIP:15272
Country:US
CAGE:GO796

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXY RESIN
Fraction by Wt: 95%
ACGIH TLV:50 PPM

Ingred Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: <.06%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE/SKIN: IRRIT. VAPORS: ANESTHETIC,IRRIT OF
    RESP TRACT,ACUTE NERVOUS SYSTEM DEPRESSION,COMA

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,GET MEDICAL ATTN. SKIN: WASH
    WITH WATER,REMOVE CONTAMINATED CLOTHING,CONSULT PHYSICIAN.
    INHALATION: REMOVE FROM EXPOSURE,RESTORE BREATHING,CONSULT
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:167F/75C (PMCC)
Lower Limits:1.2
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER FOG TO COOL EXPOSED
    CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SECURE SOURCES OF IGNITION,AVOID BREATHING
    VAPORS,VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
    TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C. DO NOT
    TAKE INTERNALLY. GROUND CONTAINER WHEN POURING,AVOID FREE FALL OF
    LIQUID IN EXCESS OF A FEW INCHES.
Other Precautions:DO NOT FLAME CUT,BRAZE OR WELD WITHOUT NIOSH/MSHA
    APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
    EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL TO KEEP EXPOSURE BELOW TLV.
Protective Gloves:REQUIRED
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT
Supplemental Safety and Health
PART A OF A TWO PART KIT. PART B ID CODE: 97-181.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:243F/117C
Vapor Density:>1
Evaporation Rate &amp; Reference:<1 (ETHER)
Percent Volatiles by Volume:0.1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CARBON MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.